The 3 BOXES configuration is useful when navigating to a destination and trying to keep
the Course Over Ground (COG) and Bearing (BRG) figures the same.
Customizing Data Boxes in the NMEA Digital Page
To customize a data box please follow the procedure below:
1. Select a NMEA Digital page, then press and hold the
will be highlighted in yellow, release the
2. Tap on the box to be changed (see A) to show the menu popup window (see B).
3. Tap on the desired group (GPS, NAVIGATION, ENVIRONMENT, ENGINE-1
ENGINE-2
1
, ENGINE-3
1
These are the default Engine names. To define the Engine names you want please see Par. 2.14.4
"Engines Name Selection".
4. Tap on desired selection. Both menu popup windows will be closed, and the selection
you made will appear in the desired box.
5. Press the
Page 98
1
or TANK). Another popup window will be shown (see C).
key one time so yellow highlight is removed from the data window (see D).
key. One of the data boxes
key.
1
,
Owner's Manual