Optional Ff525 Fish Finder; Optional Waas Gps Receiver - Standard Horizon CPN700i Owner's Manual

8.3 OPTIONAL FF525 FISH FINDER

Power Output
Frequency
Minimum Depth
Maximum Depth
Airmar X-DUCER ID
Advanced Digital Signal Processing
Speed & Temperature Sensor (if available on transducer)
Alarms (Shallow Water, Depth, Fish, Temp)
Trip Log, Fish Symbols
STC, Interference Rejection, Automatic noise reduction
A-Scope, White Line, Zoom x2/x4
Auto range/gain/frequency/shift/ping rate
16/256 colors display user selectable

8.4 OPTIONAL WAAS GPS RECEIVER

Physical Characteristics
Color
Dimensions
Weight (without cable)
Cable
Electrical Characteristics
Input Voltage
Input Current
GPS Receiver Sensitivity
GPS Performance
GNSS Systems
Geodetic Datum
Channels
Acquisition Time
Reacquisition
Hot Start
Warm Start
Cold Start
Accuracy
GPS
with SBAS
NMEA Output
Messages
Page 170
: 600W or 1kW depending on connected transducer
: 50 and 200kHz
: 5ft at 50kHz, 2.5ft at 200kHz
: 1500ft at 50kHz, 700ft at 200kHz
: Must use STANDARD HORIZON transducers part numbers
Ivory white
97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
0.35 lb (160 g)
white 15m 8x28AWG cable with 6 pins female connector
10 VDC to 35 VDC unregulated
0.8 Wmax
Tracking, Navigation
Acquisition, Reacquisition :-160 dBm
Cold Starts
GPS
GALILEO
SBAS
WGS84
32 + 18
< 1 second
1 second
29 seconds
29 seconds
< 10ft
< 2.0m
GGA, RMC, GSA, GSV, TXT
:-160 dBm
:-145 dBm
: L1 C/A
: L1
: WAAS (North America), EGNOS (Europe), MSAS (Asia),
GAGAN (India)
Owner's Manual