4.4.1.8 Finding information on a Route: Route Report page
Place cursor on Waypoint
Press 'ENTER'. Select "REPORT" and press 'ENTER':
If there are more than 8 Waypoints shown, use the ShuttlePoint knob to select another
page.
Selecting Route
Place cursor on Waypoint + 'ENTER' + "REPORT" + 'ENTER' + "SELECT" +
'ENTER'
Use the ShuttlePoint knob to select the Route number and press 'ENTER'. The Route,
shown by straight segments, is centered on the screen, with the cursor on the central
Waypoint.
Naming Route
Place cursor on Waypoint + 'ENTER' + "REPORT" + 'ENTER' + "NAME" +
'ENTER'
Use the ShuttlePoint knob to insert the Route name and press 'ENTER'.
Reversing Route
Place cursor on Waypoint + 'ENTER' + "REPORT" + 'ENTER' + "INVERT" +
'ENTER'
Reversing a Route plan is most typically used to return to the point where the Route
originally started. See also Section 4.4.2.3.
Deleting Route
Place cursor on Waypoint + 'ENTER' + "REPORT" + 'ENTER' + "CLEAR" +
'ENTER'
A window is opened: select "YES" and press 'ENTER' to confirm (select "NO" and
press 'ENTER' otherwise). See also Section 4.4.2.2.
Changing Speed & Fuel values
Place cursor on Waypoint + 'ENTER' + "REPORT" + 'ENTER' + "SPEED/FUEL"
+ 'ENTER'
GPS Chart 150
Figure 4.4.1.8 - Route Report page
Page 43