Saving And Starting A New Track - Standard Horizon CPN700i Owner's Manual

function can be setup to lay down a Track for a predetermined time or distance interval. If
you have a fast-moving boat you may want to setup the CPN Series Chart Plotter to record
a Track point every 0.5Nm or if you have a sail boat you may want to setup to lay down a
Track point once every 1 minute.
To set the time or distance interval you should follow the procedure:
1. Press the
2. Tap on TRACK. The Track menu appears.
3. Tapping on STEP UNIT selects between Dist or Time.
4. Tap on DISTANCE or TIME step interval.
5. Tap on the desired step value and tap on it.
6. Press the
When using the Tracking feature you will notice every time a Track Point is laid down on the
Chart page a small filled in circle is shown on the Track line.
If you move the cursor over the top of the circle a popup window will be shown with the Time,
Water Temperature, Speed and Course Over Ground (COG). This is very useful if you are
fishing and want to review the conditions where the fish were being caught.

2.10.1 SAVING AND STARTING A NEW TRACK

A Track can be saved and retained in memory when the power is turned off. To start a new
Track:
1. Press the
2. Tap on TRACK.
3. Tap on ACTIVE TRACK.
4. Enter the next Track number using the touchscreen keyboard. Tap on
the new Track.
5. Tap on TRACKING to start laying down Track Points.
6. Tap on to exit the menu to the Chart page.
CPN700i and CPN1010i Multimedia Chart Plotters
key, tap on User Points.
key or tap on in the Track window to exit the menu.
key, tap on User Points.
to select
Page 77