NMEA-0183/NMEA-2000 Interfacing
To take advantage of these functions the CPN Series Chart Plotter must be interfaced
(wired) to a STANDARD HORIZON or compatible DSC VHF. Refer to Chapter 7 "Connections"
for connection example.
DSC data can be received both from NMEA-0183 and NMEA-2000 relevant instruments, without any
priority. In this mode the safety will be increased.
Distress Call
CPN Series Chart Plotters are able to display the location of a vessel in distress when
interfaced to a compatible DSC VHF with NMEA-0183 or NMEA-2000 output and the radio
receives a DSC Distress Call. CPN Series Chart Plotter also log DSC Distress Calls to
review at a later date. To select the Distress Call page follow the procedure:
1. Press the
2. Turn the
rotary knob until DSC LOG is highlighted and tap on it.
This page allows to:
· tap on
· tap on
· tap on
· tap on
/
· tap on
Position Request
CPN Series Chart Plotters are able to display the location of a vessel when connected DSC
VHF radio and when a Position Request or Report Call is received. CPN Series Chart Plotter
also logs DSC Distress Calls to review at a later date. To select the Position Request page
follow the procedure:
1. Press the
2. Turn the
rotary knob until DSC LOG is highlighted and tap on it.
3. Tap on
Page 102
key, tap on User Points.
: centers the map on the selected DSC position
: deletes the selected DSC position
: deletes all entries
: allows hiding/showing the selected DSC position on the chart
: allows selecting the Position Request page.
key, tap on User Points.
.
Owner's Manual