Cartography Overview; Built-In Charts - For North America Users Only; Updating Built-In Charts - Standard Horizon CPN700i Owner's Manual

2.2 CARTOGRAPHY OVERVIEW

BUILT-IN CHARTS - For North America Users Only

2.2.1
The CPN Series Chart Plotters have Built-In Charts for coastal navigation with the following
characteristics (refer to the following image for coverage area of Built-In Charts).
· Coverage: USA including Alaska, Hawaii and Great Lakes, Canada, Bahamas,
Caribbean, Cuba, Mexico, Puerto Rico, and Central America. Fresh water coverage is
not included. Detailed coverage and Fresh waters charts are available from Jeppesen.
· Depth contours and Spot Soundings to 66ft (20m) on lower scale charts and 33ft (10m)
on higher scale charts.
· Port Info: basic information for Marinas and the list of services symbols.
· Selectable Tide page showing Tidal information, moon and sun rise and set times.
· All Nav-Aids with icon and description
· 2D standard nautical vector cartography
· Grounding Alarm is not available while using only the Built-In Charts
To use all Marina information along with 2D and 3D Raster and satellite imagery a C-MAP
4D SD CARD must be purchased and installed.

Updating Built-In Charts

The Built-In Charts can be updated by purchasing a Chart Update Card from C-MAP USA
at (800) 424-2627. This Chart Update Card may be used ONE time to update the charts
in a CPN Series Chart Plotter. After the updating, the Chart Update Card will not update
other CPN Series Chart Plotters. To purchase the Chart Update Card you must supply the
UNIT ID code. This code is found on the About page, refer to the following procedure:
Page 40 Owner's Manual