User Sd Card; Initializing The Sd Card - Standard Horizon CPN700i Owner's Manual

2.12

USER SD CARD

An optional User SD CARD can be used to backup Marks, Routes, and Tracks stored in your
CPN Series Chart Plotter's memory.
Any SD CARD can become a User SD CARD, as long as the SD CARD is initialized (see the following
Par. 2.12.1 "Initializng the SD CARD").
The User SD CARD is similar to a backup disk used with a PC. The User SD CARD is useful
to backup User Points when the RAM has to be cleared to resolve an issue or load new
Software, or if you would like to transfer Waypoint, Track and Route information from one
STANDARD HORIZON CPN Series Chart Plotter to another.
To select the User SD CARD menu follow the procedure:
1. Open the SD CARD door and insert a User SD CARD.
2. Press the
3. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD.
4. Tap on USER CARD. The User SD CARD page appears.
If a not initialized SD CARD is present in the slot, a Warning window is shown.

2.12.1 INITIALIZING THE SD CARD

The initialization or formatting of a SD CARD prepares the SD CARD to receive and store
information. Initialization permanently erases user data previously saved on the SD CARD,
but it does not affect the cartographic data present on the SD CARD.
1. Open the SD CARD door and insert the SD CARD.
If there is another SD CARD inserted into the slot yet, before following the initializing procedure, please
safely remove it using the following steps:
1. Press the
2. Tap on the right arrow next to ADVANCED Desktop icon two times to display ABOUT and tap on it.
3. Tap anywhere in the About page to display Soft Keys.
4. Tap on the
the cartridge from the slot.
5. Tap on
6. Open the door and gently remove the SD CARD from the slot.
7. Press the
Page 82
key, tap on User Points.
key, tap on Setup Menu.
Soft Key. A message is shown informing you that it is possible to remove
in the popup window, then on
key repeatedly to exit.
in the next window.
Owner's Manual