Additional Functions On Chart Page: Information On Objects; Display Mode - Standard Horizon CPN700i Owner's Manual

Additional Functions on Chart Page: Information on Objects

When on the Chart page you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations, Port Icons, and so on. If the cursor is moved over the top of these icons a popup
window will be shown containing information about the icon (this is possible only if the Auto
Info function is enabled). The CPN Series Chart Plotter allows you to see information On
All cartographic objects shown on the screen (see A), or only On Points (see B) or to turn
this function Off (in this case no popup window is shown when the cursor in placed on a
cartographic object - see C). The default setting is On Points.
To select the information displayed on Objects follow the procedure:
1. Press the
2. Tap on GENERAL.
3. Turn the rotary knob to select AUTO INFO and tap on it.
4. Tap on Off, On Points or On All.
5. When the item you want has been selected, press the

Display Mode

Selects from a pre-defined table what cartographic objects are displayed and which display
options are set. Pre-programmed settings are user selectable from Full, Medium, Low,
Radar (reduces the information on the display to simulate items that would be shown on a
Radar display. Please note this function is not actually showing Radar information it is only
showing what typically would be shown by a separate dedicated Radar display), Tides,
Custom (default mode).
To change to one of the pre-programmed settings follow the steps described below:
1. Press the
2. Tap on CHART. The Chart Configurations menu appears.
3. Tap on DISPLAY MODE.
Page 90
key, tap on Setup Menu.
key, tap on Setup Menu.
key to exit the menu.
Owner's Manual