Ip Control - Configuration - Enova Dgx 16 Configuration - AMX Enova DGX 8 Instruction Manual

When you select Home from the IP Control drop-down list, the Enova DGX 16 Home page opens. This page
displays read-only information for the Current System VM (virtual matrix) Configurations, Hardware Devices on
the Network, and Host Device Discovery Beacon Properties.
FIG. 77
Enova DGX 16 Home page
Note: The default VM is always the first VM listed on the Enova DGX 16 Home page.

IP Control - Configuration - Enova DGX 16 Configuration

Important: You must be logged in to the device to change the BCS Tunnel Port Number and click the Restart
button (which is only available when you are logged in) after the number is changed.
Log in and select Configuration from the IP Control drop-down list to open the Enova DGX 16 Configuration
page. The BCS Tunnel Port Number can be edited (available numbers are 1025-65535, except 1319). (The Serial
Port Baud Rate field is non-editable.)
FIG. 78
Enova DGX 16 Configuration page (logged in)
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Enova DGX WebConsole Interface
135