AMX Enova DGX 8 Instruction Manual page 215

Basic DGX_SHELL Commands (continued)
date
power
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
This command displays both run-time clock and system time information and the time of the last NTP
(Network Time Protocol) update and is used to update or set the RTC (Real Time Clock). For the four
"datetime" variables that affect the date, see the set command.
• rtc is the time held by the real time clock chip. The last updated is the beginning of unix time.
• systime (system time) is the time known by the coldfire and is generated locally.
Usage: date{-r|-s <seconds>}
-r resync Force a real time clock update of the system clock.
-s <epoch_seconds> Set the RTC to UTC in seconds from epoch (1970)
Example:
rtctime: Sat, 11 Aug 2012 15:27:45 UTC last updated: Thu, 01 Jan 1970 00:00:00 UTC
systime: Sat, 11 Aug 2012 15:27:46 UTC last updated: Fri, 10 Aug 2012 12:47:52 UTC
Periodically, the systime is re-synced to the rtc chip. This is the time shown as "last updated" for
systime.
Tip: To calculate epoch time, see http://www.epochconverter.com/.
This command queries power subsystems. The query provides information relating to power
consumption and temperature for various components. It also includes the option to enable/disable
power (ON/OFF) on a BCPU in the system. When used to turn the power OFF on a DXLink board, the
DXLink power is not provided to any connected DXLink Modules or Wallplates.
Usage: power [OFF | ON | STATUS | INFO] {MAIN | MAINx}{AUX}{BCPU | BCPUx}{CENTER |
CENTERx}{PPIC}{EXPIN}{EXPOUT}
Options:
ON
OFF
STATUS
INFO
Target:
MAIN
MAINx where x = 1-2
AUX
BCPU
BCPUx where x = 1-16 for Enova DGX 32; x = 1-8 for Enova DGX 16; x = 1-4 for Enova 8
CENTER use for an Enova DGX 8/16 or to target all centers in an Enova DGX 32
CENTERx where x = 1-4 for an Enova DGX 32
PPIC
EXPIN (AIE expansion board on the input side of the enclosure)
EXPOUT (AIE expansion board on the output side of the enclosure)
Example for power STATUS (partial example due to length):
BCPU1: [volts] 4.97v, [amps] 1.30a, [temp] 57.2
BCPU2: [volts] 4.91v, [amps] 1.36a, [temp] 55.7
BCPU3: [volts] 4.34v, [amps] 1.21a, [temp] 62.0
BCPU4: [volts] 4.34v, [amps] 1.71a, [temp] 61.2
Appendix H – DGX_SHELL Commands
215