Information Pane
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
The Information pane is the center panel in the Main Screen and offers
the next level of "drill down" into the system status. Information pane
buttons access information for each of the specific group components
listed. The type of information displayed in the Information pane
depends on which tab is active in the Categories pane and which
Categories button is selected.
To display diagnostic information:
1. In the Categories pane, select the Diagnostic tab.
2. Select either the Temperature or Power System buttons as
applicable.
3. In the Information pane:
a.
a. Click Visual to display visual details on the enclosure in the
System Visual pane.
For more information, see page 187.
b.
b. Click Plot to display a Plot View with a graph of data points
for information being gathered (Acquisition mode) or already
gathered (Emulation mode) for a specific component. The data is
date stamped as it is added to the graph.
For more information, see page 186.
c.
c. Click Details to display a set of analog status meters each
representing current data for its associated component.
The meters provide an analog representation of a component's
current value with respect to its Warning and Error setpoints.
If the value is below its minimum or exceeds its maximum
Warning or Error setpoint, the color of the meter changes from
green (Good) to yellow (Warning) or red (Error), making problem
areas easy to identify at a glance.
Appendix C – APDiagnostics
185