Enova Dgx Dvi Boards - Specifications - AMX Enova DGX 8 Instruction Manual

Enova DGX DVI Boards – Specifications
Applies to input board FG1058-600 and output board FG1058-610.
Digital Video – DVI Specifications
Parameter
Compatible Formats
Signal Type
HDMI Mode Support
Video Data Rate (max.)
Video Pixel Clock (max.)
Progressive Resolution Support
Interlaced Resolution Support
2K Resolution Support
Input Equalization
Input Re-clocking (CDR)
Output Re-clocking
Output Scaling
SmartScale Output Resolution
Support
Color Depth Support
Color Space Support
Local Audio Support
DDC/EDID Support
HDCP Support
Input Voltage (nominal)
Output Voltage (nominal)
Output Rise Time / Fall Time
Output +5 V DDC Pin
DVI Input Board Propagation Delay
DVI Output Board Propagation Delay
Connector
* Cable distance support is dependent on cable type and signal format.
Note: Interlaced and progressive video are supported into the HDMI Input Board; progressive video is only
supported out of the HDMI Output Board, unless in non-scaling bypass mode.
AMX reserves the right to modify its products and their specifications without notice.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
DVI, HDCP
DVI-D (single link)
HDMI (with DVI cable adapter)
DisplayPort ++ (input only, with DVI cable adapter)
DVI Boards can be run in HDMI mode with an EDID update which will
provide full HDMI functionality and board specifications
4.95 Gbps (6.75 Gbps for HDMI Mode)
165 MHz
480p up to 1920x1200 @ 60 Hz
480i, 576i,1080i
2048x1024 @ 47 Hz, 2048x1080 @ 60 Hz, 2048x1152 @ 60 Hz, 2048x1536
@ 24 Hz
• 2K formats are only compatible with DVI and HDMI Input/Output Boards and
require the output scaler to be set in Bypass mode
Yes, adaptive up to 100 ft. (30 m) at 165 MHz*
Yes
Yes
SmartScale, Manual Configuration, Bypass
All resolutions between 480p and 1920x1200 @ 60 Hz via automatic
SmartScale query of the display's preferred EDID Detailed Timing Definition
24-bit
RGB 4:4:4
Yes, insertion and/or extraction of 2 CH L-PCM selectable by channel
EDID provided by the Enova DGX Digital Media Switcher
EDID is user re-programmable
Yes, full matrix HDCP support (includes any input to any or all outputs, except
for SC Optical Inputs and Outputs)
• Key Management System
• AMX HDCP InstaGate Pro® Technology
• Key support up to 16 devices per output, independent of source device
1.0 Vpp differential
1.0 Vpp differential
100 ps min. to 200 ps max. (20% to 80%)
0.16 UI min. to 0.33 UI max. (@ 1.65 Gbps,20% to 80%)
50 mA
2 s
24 ms for progressive, 48 ms for interlaced, 5 s when in Bypass mode
4 DVI-I ports (DVI-D single link is the supported signal type)
Enova DGX DVI Boards
Value
77