Power Supply Units - AMX Enova DGX 8 Instruction Manual

Enova dgx digital media switchers
Hide thumbs Also See for Enova DGX 8:
Table of Contents

Advertisement

Power Supply Units

Each of the power supply units on the rear of the enclosure (FIG. 7) has a power receptacle that will accept all
major international standard power sources. (US power cords are included with all shipments unless ordered
otherwise.) Maximum power specifications are provided on the power supply receptacles. For information on
applying power, see page 37.
The power supply units have two LED indicators:





FIG. 7
Power supply receptacles for Enova DGX 8/16 (left) and Enova DGX 32 (right)
Input and Output Boards
A single enclosure can handle a combination of signals depending on the types of input and output boards.
Note: All boards in the table below are HDCP 1.4 compatible except for the SC Optical Boards.
Input and Output Boards and Supported Signals
I/O Board Types
Input: HDMI
Output: HDMI
Input: DVI
Output: DVI
Input and Output: DXLink^
Input and Output: SC Optical^^
* HDMI Boards require a cable adapter to support single-link DVI signals.
** For a DVI Board to support embedded audio on an HDMI signal, the EDID must be updated.
*** Supported analog video signals include RGBHV, RGBS, RGsB, and Y/Pb/Pr in and RGBHV out.
^ Signals supported by DXLink Twisted Pair Boards depend on the type of DXLink Transmitters and Receivers used.
^^ Signals supported by SC Optical Boards depend of the type of DGX Fiber Transmitters and Receivers used.
Note: The DXLink Twisted Pair Boards also support embedded power, NetLinx control, and Ethernet.
All signals are automatically converted to the destination device's format, with DXLink Twisted Pair Transmitters
and Receivers used for transport of signals with DXLink Boards and DGX Fiber Transmitters and Receivers used
in the conversion process for the DGX SC Optical Boards.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
AC: Green LED – power is good
DC: The DC indicator uses a tri-color LED
Green – power is good
Amber – temperature is above normal
Red – power supply is in a fault state
Enova DGX 8/16 - Indicator LEDs
Product Overview and General Specifications
Enova DGX 32 - Indicator LEDs
*
*
*
*
**

**

***
***
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enova dgx 32

Table of Contents