AMX Enova DGX 8 Instruction Manual page 68

EDID Resolutions Supported through Local DDC
Standard and established timings are given in the tables following along with detailed timing blocks.
Important: The EDID can be re-programmed to support additional resolutions through the local DDC using
the EDID programming functionality in the DGX Configuration Software (see page 162).
Standard Timings (Default Shipping EDID*)
Resolution
1920x1080**
1920x1200
1680x1050
1600x1200
1600x900
1400x1050
1440x900
1360x765
1280x1024
1280x900
1280x800
1280x720
* The default EDID can be overwritten to include a broad range of features, including HDMI mode, based on installation
requirements.
** This is the preferred timing identified in the EDID.
Established Timings
Resolution
1280x1024
1152x870
1024x768
832x624
800x600
720x400
640x480
AMX reserves the right to modify its products and their specifications without notice.
Tip: If you are experiencing audio problems, it may be because you are trying to pass Dolby or DTS or high
PCM frequency rates and the destination device does not support them. If you are experiencing video
problems, it may be because you are trying to pass a video format that the destination device does not
support. In either of these cases, re-programming the EDID may help resolve the problem.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Refresh Rate Max.
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Refresh Rate
75 Hz
75 Hz
60 Hz, 70 Hz, 75 Hz, 87 Hz
75 Hz
56 HZ, 60 Hz, 72 Hz, 75 Hz
70 Hz, 88 Hz
60 Hz, 67 Hz, 72 Hz, 75 Hz
Enova DGX HDMI Boards
68