Executing Local Presets - AMX Enova DGX 8 Instruction Manual

7. Press either the Select Key or the Take Key.
8. Wait approximately ten seconds for the system to store the global preset setting.
The current routing state can now be recalled as Global Preset 3, and the system returns to the Global Preset
submenu.
9. Press the Function Key to return to the Function menu.
To execute a global preset:
1. Press the Function Key.
The Function menu appears.
2. Locate Global Preset by scrolling with the Control Dial.
3. Press the Select Key.
Execute Global appears.
4. Press the Select Key.
The Execute Global Preset list appears.
5. Scroll with the Control Dial until Global Preset 3 appears.
6. Press either the Select Key or the Take Key.
Global Preset 3 is executed. The system now reflects the routing state that it was in when Global Preset 3 was
defined.
The system returns to the Global Preset submenu.
7. Press the Function Key to return to the Function menu.
Note: Status is not invalidated by global presets.

Executing Local Presets

A local preset is a predetermined set of switches on a particular virtual matrix that are routed simultaneously. They
are stored in each enclosure's configuration file and can be executed at any time. Local Preset will not appear as a
submenu option in the Function menu if local presets have not already been defined. In addition, they will not
appear if the system is on a virtual matrix that does not have local presets. The Enova DGX supports 335 local
presets.
Local presets are not programmed (defined) at the factory. To program them, use XNConnect configuration
software (see page 177) or contact your AMX representative (for contact information, see page 64). Once the local
presets have been defined as part of the configuration file, the new file must be loaded to the system's CPU (see
page 179) and reloaded to the Control Panel (see page 123).
Make sure the Control Panel is switching on the virtual matrix where the local preset resides. If no local presets
have been defined for the selected VM, the Local Preset submenu option will not be available on the Function
menu.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Control Panel Operation
118