Product Notes - AMX Enova DGX 8 Instruction Manual

Epica DGX SC Optical Boards* (page 95)
* Epica DGX SC Optical Boards work in Enova DGX enclosures and must be used in conjunction with DGX
Fiber Transmitters and Receivers. For model numbers of compatible modules, see page 96. For system setup
information, see page 97.
Enova DGX Expansion Boards
Enova DGX Switchers currently support the Audio Insert/Extract Board. This board can be installed in either or
both of the expansion slots. Audio Insert/Extract Boards will not fit in a standard input or output board slot.
Enova DGX Audio Insert/Extract Board (page 100)

Product Notes

The Enova DGX Digital Media Switcher includes an integrated NetLinx Central Control Processor, supports
InstaGate Pro
and digital audio and video including HDMI/HDCP, control, and Ethernet.
The Enova DGX Switcher is available as a custom system, which means it can be ordered in input to output
configuration sizes that fit your installation and contain an assortment of input, output, and expansion boards in a
single enclosure.
Note: Because Enova DGX Switchers are available as custom systems, the illustrations in this manual may
differ from the model(s) you purchased.
Features of the Enova DGX Digital Media Switcher
HDMI, DVI, DXLink™, and Audio











Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Type
SC Optical Input
SC Optical Output
Type
Audio Insert/Extract
®
, DXLink™ Technology, and SmartScale
True HDMI switching, allowing any input to be switched to any or all outputs (including SC Optical).
®
Incorporates HDMI technology – HDMI, DVI, and DXLink™ Twisted Pair Boards.
HDCP 1.4 compatible (all boards except SC Optical Boards which cannot pass HDCP).
Supports uncompressed video resolutions up to 1920x1200 @ 60 Hz, including HDTV up to 1080p.
DGX Technology provides a common signal transport and matrix switching layer that transcodes between
analog and digital signals.
HDMI and DVI Output Boards, as well as compatible DGX Fiber Receivers, feature SmartScale
Technology which automatically responds to the display's preferred EDID information and scales the video
to the best resolution and video parameters for that display without manual setup.
Pre-loaded with the most common EDID settings on each switcher input connector (other than fiber
connectors) to emulate display response when queried, which ensures that transmission of the video from the
source device is working.
Custom EDID settings can be loaded on each DVI and HDMI input with DGX Configuration Software
(available at www.amx.com).
®
InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix
switching to all compliant displays. No tools, no delays, and no key constraints – it just works.
DXLink™ Twisted Pair Boards provide transport over twisted pair cable.
The Audio Insert/Extract (expansion) Board can be set to insert/extract audio into/out of video input or output
boards.
Product Overview and General Specifications
FG #
FG1056-500
FG1056-510
FG #
FG1058-700 AVS-ENOVADGX32-AUD-INS-EXT
®
on every output, and manages and distributes analog
Model
AVS-EPDGX32-OI-SC
AVS-EPDGX32-OO-SC
Model
®
13