AMX Enova DGX 8 Instruction Manual page 20

If a system has empty input or output board slots (which are numbered for additional inputs and outputs), the slots
can be used to expand the system. For information on adding or replacing boards, see "Appendix E
Replacing Boards" on page 198.
Note: Audio Insert/Extract (expansion) Boards are also available. They provide audio insertion and extraction
functionality and are used in conjunction with HDMI, DVI, and DXLink Boards (see "Expansion Boards" on
page 20).
Input and Output Board Connectors
The connectors on the input and output boards are the attachment points for source and destination devices that
connect to the system. Viewed from the rear of the enclosure, the input connectors (for attaching sources) are on
the left, and the output connectors (for attaching destinations) are on the right.
Input and output channel numbers correspond to the connectors and are located as follows:


Connectors and Signal Types
Connector
HDMI
DVI
DXLink (RJ-45)
(Signal support depends on the
type of DXLink Transmitters and
Receivers used.)
SC Fiber
(Signal support depends on the
type of DGX Fiber Transmitters
and Receivers used.)
* For a DVI connector to support embedded audio on an HDMI signal, the EDID must be updated.
Note: An analog stereo audio signal from a pluggable 3-position terminal block connector can be inserted
from an Audio Insert/Extract Board onto a DVI or HDMI signal (replaces any existing embedded digital audio
signal). The Audio Insert/Extract Board also works in conjunction with DVI and HDMI signals on DXLink
boards.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Enova DGX 8/16 – on the vertical numbering plate (metal strip) between the input and output connectors.
Enova DGX 32 – on the horizontal numbering plate (metal strip) directly above the connectors.
Supported Signals
• HDMI with or without HDCP or embedded digital audio
• DVI-D (single link) with or without HDCP (adapter cable required)
• DVI-D (single link) with or without HDCP
• HDMI with or without HDCP or embedded digital audio*
• HDMI with or without HDCP or embedded digital audio
• DVI with or without HDCP or embedded digital audio
• Analog video input (RGBHV, RGBS, RGsB, Y/Pb/Pr)
• Digital audio or analog stereo audio
• Embedded power, NetLinx, and Ethernet
• HDMI (non-HDCP) output as DVI (adapter cable required)
• DVI-D (non-HDCP)
• Analog video input (RGBHV, RGBS, RGsB, Y/Pb/Pr)
• Analog video output (RGBHV)
• Analog stereo audio or S/PDIF
Product Overview and General Specifications
Adding or
–
20