AMX Enova DGX 8 Instruction Manual page 111

Control Panel Operation
Menus and Modes
The Function menu and its submenus access the modes and functions used to
control the system. The modes are Change, Virtual Matrix, Status, Disconnect,
Setup Options, Lock Panel, Global Preset, and Local Preset. While in a mode, the
same command can be repeated, without having to return to the Function menu to
re-select the mode, e.g., executing more than one local preset.
Use the Control Dial and Select Key to navigate the Function menu, and submenus.
The Function menu and the submenus are loop menus, which means that each
menu returns to its first item after you scroll past its last item.
Note: A clear label with white lettering that shows the entire LCD Function
menu (as shown on the right) is included in the Control Panel Label Kit shipped
with the system. Dust surface of panel near the LCD with a dry cloth (if
necessary, use a non-abrasive cleaner), peel the backing off of the label, and
firmly press the label on the panel.
The Function menu (see right) and its submenus access the following modes and
Function menu structure
functions:
Change
Selecting Change places the system in Change Mode. The Control Panel must be in Change Mode to execute
switches. While in Change Mode, select the Input and Output(s) Keys followed by the Take Key to execute
switches (see page 113).
Virtual Matrix
Selecting the Virtual Matrix Mode accesses the virtual matrices designated for the system in the configuration file
(VM 0, VM 1, and any custom virtual matrices). The Virtual Matrix Mode can be selected to change the virtual
matrix currently used to execute operations (see page 114).
Status
Selecting Status places the system in Status Mode. Status Mode is used to confirm signal routing or routing to
multiple outputs without risk of accidentally executing a switch (see page 116).
Disconnect
Selecting Disconnect places the system in Disconnect Mode. While in Disconnect Mode, select the Input or
Output Key(s) followed by the Take Key to disconnect switches (see page 115). While in Disconnect Mode, the
Control Panel does not indicate the current routing of selected inputs or outputs.
Setup Options
Selecting Setup Options (see page 121) accesses the Setup Options submenu to check the software version,
change the default virtual matrix, reload the configuration file (when directed to do so by technical support), and
change the Control Panel password.
Lock Panel
Selecting Lock Panel places the Control Panel in Lock Mode at which time the password is entered to lock the
panel. Locking the panel prohibits access to the system and can prevent accidental switching (see page 119).
Global Preset
Selecting Global Preset accesses the Global Preset submenu to execute global presets or define global presets
(see page 117).
Local Preset
Selecting Local Preset accesses the list of local presets that can be executed (see page 119). Local Preset will only
appear as an option on the Function menu if local presets have been defined in XNConnect configuration software
for the selected virtual matrix.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers 111