Blackberry Bold 9700 Manual page 105

CHAPTER 2: Windows PC Setup
80
Figure 2-15. Conflict Resolution choices window from Advanced sync settings (for MemoPad application)
Filters
The Filters function allows you to filter data that is synchronized. This can be extremely
useful if you have specific data that you do or do not want to be synchronized to your
BlackBerry from your computer. With filters and creative use of information typed in your
desktop application, you can do just about anything you want. To set up a new filter,
Click the Filters button shown in Figure 2-13 and follow the following steps and in
Figure 2-16.
1. Click New.
2. Enter a name for your Filter.
3. Click OK.
4. Click the drop-down for Field.
5. Select an Operator, such as starts with, contains, or equals.
6. Type a Value to use to compare for the selected field and operator.
7. Click the Add to List button. Repeat steps 4-7 for additional fields, if
desired.
8. Click the Rules tab at the top.
9. Select one of the two conditions: All Conditions or One or more.
10. Click OK to return to the screen shown in the upper right corner of
Figure 2-16.
11. Check or uncheck the box that says Delete from device any data that
does not match the filter as desired. Then click OK again.
12. Finally, click OK to save your changes.
Default setting –
ask every time.
(Recommended)
BlackBerry wins.