Table of Contents
Advertisement
Configuration - Setup Page
Overview
Each Hub must be configured for the correct network environment. It is also possible to view device
information, set this UDM-1604C as the Master Hub in a cascaded system, configure the Hub for the
correct date and time and specify Restore options, via options in the Setup page (FIG. 42):
FIG. 42
Setup Page
Device Information
The top portion of the Setup page provides several Device Information items as well as Fan control,
SLIP authentication and an option to enable advanced video compensation controls:
Setup Page - Device Information
Controller firmware: This display-only field indicates the current controller firmware version.
Port:
Input:
HTML
Serial number:
Internal temp:
Fans:
Cascade Master:
Authenticate SLIP:
Enable advanced
options:
UDM-1604C 4x16 Multi-Format Distribution Hub
This display-only field indicates the current port (UDM) firmware version.
This display-only field indicates the current input firmware version.
This display-only field indicates the current HTML (WebConsole) version.
This display-only field indicates the unique serial number for this UDM Hub.
This display-only field indicates the current internal temperature of the unit.
These radio buttons allow you to turn off the internal fans. The default setting is "Auto"
(fans will automatically turn on and off based on the internal temperature reading).
Caution: by turning off the fans, the unit may be susceptible to overheating.
Click to enable Cascading for this UDM-1604C. Refer to the Cascading Hubs section on
page 79 for details.
By default, SLIP authentication is enabled. De-select this option to disable SLIP authenti-
cation.
Enable this option to access the advanced video compensation settings (in the Port Con-
figuration options - see the Advanced Video Compensation section on page 30).
Configuration - Setup Page
Device information
Network Configuration
Date / Time Settings
Restore Options
45
Advertisement
Table of Contents
