Using Single Sheets; Loading A Paper From The Paper Table - Fujitsu DL7600Pro User Manual

USING SINGLE
SHEETS
User's Manual
This section describes how to load paper from the paper table or cut sheet
feeder. The paper table allows paper to be loaded manually, one sheet at
a time. A cut sheet feeder allows paper to be loaded automatically from
the paper bin.

Loading a Paper From The Paper Table.

To load a sheet of paper from the paper table:
1. Make sure that the printer is turned on.
2. Press the PAPER PATH button to select CUT SHEET (the
indicator lights).
3. Press the FRONT DIR button to select the direction of ejecting
single sheets.
Front ejection — FRONTDIR indicator lights.
•
Rear ejection — FRONTDIR indicator doesn't light.
•
4. Adjust the left margin.
On the left hand side of the paper table, a scale graduated in
units of 1 [mm]. When the paper guide is positioned at scale 0
[mm], the left margin is 5 mm (0.2 inch).
Push the lock lever down to secure the guide.
0(zero)
Movable guide
Lock lever
Preparing to load a sheet of paper
PAPER HANDLING
Sub guide
3-13