NEC XN120 Feature Manual page 63

Cost Centre Codes
n Description
Certain Network providers can accept a Cost Centre Code (CCC) that will be used to provide an
itemised bill from their Network provider.
The CCC is inserted automatically by the XN120 before the dialled digits and is stripped off by the
Network provider.
There are two methods that the XN120 can send CCC to the Network:
Send the CCC to the direct carrier.
OR
Send the CCC within the Least Cost Routing (LCR) access codes. You can then get extension billing
from the indirect carrier.
Conditions
You must confirm the quantity of CCC digits required by the Network provider otherwise calls
will not route correctly.
Confirm with the Network provider that Cost Centre Codes are supported if you also have Carrier
Pre-Select (CPS) operation.
Default Setting
Disabled.
n Programming
Ø 14-01-23 : LCR Mode – Select type 2: LCR ON(Cost Centre Code only).
Ø 26-07-01 : Cost Centre Codes – Set the CCC for each extension.
n Related Features
Ø LCR – Least Cost Routing
Cost Centre Codes can be combined with the LCR operation.
n Operation
The operation is automatic and cannot be bypassed.
61
Features
Features Manual