NEC XN120 Feature Manual page 48

Features
n Operation
To place a call over a trunk group:
1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. Dial 804.
3. Dial line group number (01-25).
4. Dial number.
OR
1. At system phone, press trunk group key (PGM 15-07 or SC 851: *02 + group).
Also see the "Loop Keys" feature.
2. Dial number.
To place a call using Trunk Group Routing:
1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. Dial 9.
If your system has an Alternate Trunk Route Access code, you may dial that instead.
3. Dial number.
OR
1. At system phone, press Trunk Group Routing key (PGM 15-07 or SC 852: *05).
Also see the "Loop Keys" feature.
2. Dial number.
To place a call over a specific trunk:
1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. Dial 805.
3. Dial line number (e.g., 05 for line 5).
4. Dial number.
OR
1. At system phone, press line key (PGM 15-07 or SC 852: 01 to 51).
Also see the "Loop Keys" feature.
2. Dial number.
Features Manual
46