NEC XN120 Feature Manual page 139

Conditions
A) The following programs are affected by Night Mode:
15-06
15-09
15-11
20-06
21-02
21-04
21-12
21-15
B) Almost all features are affected by Night Mode except for the following:
·
Dial Tone Detection
·
External Alarm Sensors
·
Flexible System Numbering
·
Pulse to Tone conversion
·
SMDR
·
Volume Control
Default Setting
System is always in the Day Mode.
Automatic night mode switching is disabled (Program 12-01-02=0).
Manual night mode switching is enabled on the system (Program 12-01-01=1) but disabled in the
telephones Class of Service (Program 20-07-01=0).
n Programming
Ø 10-21-01 : Hardware Setup, External Source Control Switch Selection
Ø 11-10-01 : Service Code Setup (for System Administrator) - Day / Night Mode Switching
Ø 12-01-01 : Night Mode Function Setup - Manual Night Service Enable
Ø 12-01-02 : Night Mode Function Setup - Automatic Night Service Enabled
Ø 12-02-01 : Automatic Night Service Patterns
Ø 12-03-01 : Weekly Night Service Switching
Ø 12-04-01 : Holiday Night Service Switching
Ø 12-05-01 : Night Mode Group Assignment for Extensions
Ø 12-06-01 : Night Mode Group Assignment for Trunks
Ø 12-07-01 : Text Data for Night Mode
Ø 14-07-01 : Trunk Access Map Setup
Ø 15-06-01 : Trunk Access Map for Extensions
Ø 15-07-01 : Programmable Function Keys
Ø 20-06-01 : Class of Service for Extensions
Ø 20-07-01 : Class of Service Options (Administrator Level) - Manual Night Mode Switching
Ø 22-04-01 : Incoming Extension Ring Group Assignment
Ø 22-05-01 : Incoming Trunk Ring Group Assignment
Ø 22-08-01 : DIL/IRG No Answer Destination
Ø 31-05-01 : Universal Night Answer
n Related Features
Ø Central Office Calls, Answering and Placing/Ring Groups
Ø Paging, External
Ø Programmable Function Keys
Ø Voice Response System (VRS)
22-05 25-04 34-02
22-07 25-05 34-03
22-08 25-08 34-04
22-12 25-09
22-13 25-10
23-03 25-11
25-02 25-12
25-03 31-05
137
Features
Features Manual