NEC XN120 Feature Manual page 59

n Related Features
Ø Central Office Calls, Placing
Ø Conference, Voice Call
Ø Direct Inward System Access (DISA) / Tie Lines
Ø Meet Me Conference
Ø Meet Me Paging
Ø Programmable Function Keys
Ø Tandem Trunking
n Operation
To establish a Conference:
System Phone
1. Establish Intercom or trunk call.
2. Press DND/CONF or Conference key (PGM 15-07 or SC 851: 07).
3. Dial extension you want to add.
OR
Access outside call
OR
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or dial a trunk/trunk group code. You can optionally go back to
step 2 to add more parties to your Conference.
4. When called party answers, press DND/CONF or Conference key twice.
If you cannot add additional parties to your Conference, you have exceeded the system's
Conference limit.
5. Repeat steps 2-4 to add more parties.
Single Line Set
1. Establish Intercom or trunk call.
2. Single Line Telephone
Recall and dial 826.
3. Dial extension you want to add.
OR
Access trunk call.
4. Single Line Telephone
Recall and repeat step 3 to add more parties.
OR
Recall twice to set up the Conference.
If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.
To exit a Conference without affecting the other internal parties:
System Phone
1. Hang up.
If you press Hold while on a call with two outside callers, the outside callers hear Music on Hold.
If you are the only internal extension that is part of a conference that includes two or more exchange lines then hanging
up will clear the trunk calls.
Single Line Set
1. Hang up.
If you are not permitted to use Tandem Trunking, outside callers may hear Music on Hold.
57
Features
Features Manual