NEC XN120 Feature Manual page 25

n Operation
To activate or cancel Call Forwarding:
1. Press a SPK key (or lift handset) + Dial 888.
Also allowed are 848 (Call Forward Immediate), 843 (Call Forward Busy), 845 (Call Forward No Answer, 844 (Call
Forward, Busy/No Answer, or 842 (Call Forward Both Ring).
OR
Press Call Forwarding key (PGM 15-07 or SC 851: code 10).
2. Dial Call Forwarding condition:
1 = Personal Answering Machine Emulation (then skip to step 4 - refer also to "Voice Mail").
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate with simultaneous ringing (not for Voice Mail)
0 = Cancel
3. Dial destination extension, Voice Mail master number or press Voice Mail key.
4. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
5. Press SPK to hang up (hang up at SLT) if you dialled 888 in step 1.
Your DND or Call Forwarding (Station) Programmable Function Key flashes when Call Forwarding is activated.
Press Call Forwarding key.
PGM 15-07 or SC 851: code 10 for Forward All Calls Immediately
PGM 15-07 or SC 851: code 11 for Forward when Busy
PGM 15-07 or SC 851: code 12 for Forward when Unanswered
PGM 15-07 or SC 851: code 13 for Forward Busy/No Answer
PGM 15-07 or SC 851: code 14 for Forward with Both Ringing
When you enable Call Forwarding, your Call Forwarding key flashes slowly. If you don't have a Call Forwarding key,
DND flashes slowly.
6. Dial 1 plus extension to enable; dial 0 to disable.
DND flashes slowly. Once you activate Call Forwarding, only your Call Forwarding destination can place an Intercom
call to you.
7. At system phone, press SPK to hang up.
OR
At single line set, hang up.
You'll hear stutter dial tone when placing a new call.
23
Features
Features Manual