NEC XN120 Feature Manual page 37

Call Waiting / Camp On
n Description
With Call Waiting, an extension user may call a busy extension and wait in line (Camp-On) without
hanging up. When the user Camps-On, the system signals the busy extension with two beeps indicating
the waiting call. The call goes through when the busy extension becomes free. Call Waiting helps busy
extension users know when they have additional waiting calls. It also lets callers wait in line for a busy
extension without being forgotten.
Conditions
None
Default Setting
Enabled.
n Programming
Ø 11-12-47 : Service Code Setup (for Service Access) - Call Waiting Answer / Split Answer for SLT
Ø 15-07-01 : Programming Function Keys
Ø 20-18-06 : Service Tone Timer - Call Waiting Tone Timer
n Related Features
Ø Callback
Ø Dual Line Appearance/Off Hook Signaling
Ø Off Hook Signaling
Ø Programmable Function Keys
Ø Transfer
Ø Trunk Queuing/Camp-On
n Operation
To Camp-On to a busy extension:
1. Call busy extension.
2. Dial 850 or Press Camp-On key (PGM 15-07 or SC 851: 35).
3. Do not hang up.
To Camp-On to a trunk, see Trunk Queuing.
To cancel a Camp-On request:
1. Hang up.
2. At system phone, press a SPK key and Dial 870.
OR
At system phone, press Camp-On key (PGM 15-07 or SC 851: 35).
OR
At single line set, lift handset and dial 870.
To Split (answer a waiting call) at a single line telephone:
Listen for Camp On beep.
1. Single Line Telephone:
Recall and dial 894
To repeatedly split between the two calls.
35
Features
Features Manual