NEC XN120 Feature Manual page 117

Long Conversation Cutoff
n Description
For incoming and outgoing central office calls, each trunk can be programmed to disconnect after a
defined length of time. The timer begins when the trunk is seized and disconnects the call after the
timer expires.
When used with the Warning Tone for Long Conversation feature, the system can provide a warning
tone on outgoing trunks calls before the call is disconnected. This tone is not available to analogue
single line telephone users nor is it available for incoming calls.
Conditions
None
Default Setting
Disabled.
n Programming
Ø 14-01-14 : Basic Trunk Data Setup - Long Conversation Cutoff
Ø 14-01-15 : Basic Trunk Data Setup - Long Conversation Alarm Before Cut Off
Ø 20-06-01 : Class of Service for Extensions
Ø 20-13-02 : Class of Service Options (Supplementary Service)
Ø 20-13-03 : Class of Service Options (Supplementary Service)
Ø 20-21-03 : System Options for Long Conversation
Ø 20-21-04 : System Options for Long Conversation
n Related Features
Ø Central Office Calls, Answering/Central Office Calls, Placing
Ø Direct Inward System Access (DISA)/Tie Lines
Ø Warning Tone for Long Conversation
n Operation
Feature is automatic once programmed.
- Long Conversation Cutoff (Incoming)
- Long Conversation Cutoff (Outgoing)
- Long Conversation Cutoff Timer for Incoming Calls
- Long Conversation Cutoff Timer for Outgoing Calls
115
Features
Features Manual