NEC XN120 Feature Manual page 161

Repeat Redial
n Description
If a system phone user places a trunk call that is busy or unanswered, they can have Repeat Redial try
it again later on. The user doesn't continually have to try the number again -- hoping it will go through.
Repeat Redial automatically retries it until the called party answers (the number of retries is based on
system programming).
Conditions
Lifting the handset will cancel Repeat Redial.
Default Setting
Enabled.
n Programming
Ø 15-07-01 : Programming Function Keys
Ø 20-06-01 : Class of Service for Extensions
Ø 20-08-07 : Class of Service Options (Outgoing Call Service) - Repeat Redial
Ø 21-08-01 : Repeat Dial Setup - Repeat Redial Count
Ø 21-08-02 : Repeat Dial Setup - Repeat Redial Interval Time
Ø 21-08-03 : Repeat Dial Setup - Repeat Dial Calling Timer
n Related Features
Ø Automatic Route Selection
Ø Central Office Calls, Placing
Ø Last Number Redial/Save Number Dialled
Ø Networking
Ø Single Line Telephones
n Operation
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place trunk call.
Listen for busy tone or ring-no-answer.
2. Press DC + LND.
OR
Press Repeat Redial Key (PGM 15-07 or SC 851: 29).
Your Repeat Redial key flashes while you wait for the system to redial.
3. Press SPK to hang up.
The system periodically redials the call.
4. Lift handset when called party answers.
To cancel Repeat Redial:
1. Press DC.
2. Press LND.
OR
1. Press Repeat Redial Key (PGM 15-07 or SC 851: 29).
See also Last Number Redial.
159
Features
Features Manual