NEC XN120 Feature Manual page 135

n Programming
Ø 10-04-01 : Music on Hold Setup - Music on Hold Source Selection
Ø 10-04-02 : Music on Hold Setup - Music Selection for Internal Source
Ø 10-04-03 : Music on Hold Setup - Audio Gain Setup
Ø 14-08-01 : Music on Hold Source for Trunks
Ø 14-08-02 : Music on Hold Source Port Number
Ø 20-06-01 : Class of Service for Extensions
Ø 20-07-02 : Class of Service Options (Administrator Level) - Changing the Music on Hold Tone
Ø 22-11-09 : MOH type per DDI
Ø 22-11-10 : MOH ACI port number per DDI
Ø 33-01-01 : ACI Port Type Setup
n Related Features
Ø Single Line Telephones
n Operation
To change the Music on Hold tone:
1. Press idle CALL key.
2. Dial 881.
3. Dial Music on Hold tone code:
00 No Tone (Silence)
01 XN120 Tune
02 XN120 Tune (There is only 1 tune available on the XN120)
4. Press SPK to hang up.
This service code setting will change the music on hold tone for any call that is set to use Program
10-04-01 as the music on hold source.
When Program 10-04-01 is not set as the MOH source then the music on hold tone played to the held
caller is shown below.
Program 10-04
setting
Program
10-04-01 set to
0 (XN120 tune)
Program
10-04-01 set to
1 (External)
Type of call
MOH set by
placed on hold
Service Code
Internal call
DDI call with
22-11-09=0 (Uses
10-04-01)
DDI call with BGM Input
22-11-09=1
(BGM input)
DDI call with EXMOH Input
22-11-09=2
(EXMOH input)
Internal call
DDI call with
22-11-09=0 (Uses
10-04-01)
DDI call with BGM Input
22-11-09=1
(BGM input)
DDI call with EXMOH Input
22-11-09=2
(EXMOH input)
133
MOH set by
Service Code
881=00 881=01 or 02
Silence XN120 tune
Silence XN120 tune
BGM Input
defined by defined by
33-01-01 33-01-01
EXMOH Input
defined by defined by
22-11-10 22-11-10
EXMOH Input
Silence on XN120 Main
EXMOH Input
Silence on XN120 Main
BGM Input
defined by defined by
33-01-01 33-01-01
EXMOH Input
defined by defined by
22-11-10 22-11-10
Features
Unit
Unit
Features Manual