NEC XN120 Feature Manual page 14

Features
To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialling a code. Refer to Central Office Calls, Placing for more
information.
With Forced Account Codes, you hear, "Please enter an Account Code." Your display shows: ENTER ACCOUNT.
2. Dial *.
3. Dial your Account Code (1-16 digits, using 0-9 and #).
4. Dial *.
If the system has Forced Account Codes and you don't enter a code, your call cannot go through. You can, however,
dial ** to bypass Forced Account Code entry.
5. Dial number you want to call.
If you hear "stutter" dial tone after dialling the number, ARS is requesting you to enter an ARS Authorization Code.
Refer to the Automatic Route Selection feature for more information on ARS Authorization Codes.
To enter an Account Code at a single line set:
1. Access trunk for outside call.
You can access a trunk by dialling a code. Refer to Central Office Calls, Placing for more information.
With Forced Account Codes, you hear, "Please enter an Account Code." Your display shows: ENTER ACCOUNT.
2. Dial *.
3. Enter Account Code (1-16 digits).
4. Dial *.
5. Dial number you want to call.
If you hear "stutter" dial tone after dialling the number, ARS is requesting you to enter an ARS Authorization Code.
Refer to the Automatic Route Selection feature for more information on ARS Authorization Codes.
Features Manual
12