NEC XN120 Feature Manual page 3

Issue
Date
No.
1.1 February 2005
1.2 April 2005
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or
representation with respect to, any of the equipment covered. This manual is subject to change without notice and
NEC Infrontia Ltd has no obligation to provide any updates or corrections to this manual. Further, NEC Infrontia
Ltd also reserves the right, without prior notice, to make changes in equipment design or components as it deems
appropriate. No representation is made that this manual is complete or accurate in all respects and NEC Infrontia Ltd
shall not be liable for any errors or omissions. In no event shall NEC Infrontia Ltd be liable for any incidental or
consequential damages in connection with the use of this manual. This document contains proprietary information
that is protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced
without prior written consent of NEC Infrontia Ltd.
Single Line telephone – Add specifications
SMDR – Add correct output examples and options from the
EXIFU guide.
Add Trunk to Trunk Forwarding
Add Trunk to Trunk Transfer
Message Waiting
Message Waiting has references to VRS indication. This has
been removed as it is not available.
Alphanumeric Display
Add the multi language options.
Central Office Calls – Answering
Add Program 20-09-06 to select the display when an ISDN trunk
call is ringing.
Class of Service
Add Program 20-09-06 to select the display when an ISDN trunk
call is ringing.
Direct Dial In
Add Program 20-09-06 to select the display when an ISDN
trunk call is ringing
Copyright © 2004 by NEC Infrontia Ltd
All Rights Reserved.
Reason of Change
.