NEC XN120 Feature Manual page 42

Features
Outputting Caller ID Data
The system includes the Caller ID data on the SMDR report. The report provides the incoming call's DN in
the DIALED NUMBER field. The CLASS field shows PIN (just like all other incoming calls).
Caller ID Digits to Voice Mail
A Caller ID trunk can send Remote Log-On Protocol with Caller ID digits to the voice mail. When a trunk
'001' receives the Caller ID as '12345', the protocol becomes '***6001*12345*'.
Caller ID Type (FSK/DTMF)
The type of Caller ID received can be set for each analogue trunk with Program 14-02-16.
The type of Caller ID sent to each SLT telephone can be set with Program 15-03-11.
ISDN Calls Display Reason for No Caller ID Information
With Caller ID enabled, the system will provide information for ISDN calls that do not contain the Caller ID
information. If the Caller ID information is restricted, the telephone display will show "PRIVATE". If the
system is not able to provide Caller ID information because telco information is not available, then the
display will show "No Caller Info".
n Programming
Ø 14-01-20 : Basic Trunk Data Setup - Block Outgoing Caller ID
Ø 14-01-21 : Caller ID Block Code
Ø 14-01-22 : Basic Trunk Data Setup - Caller ID to Voice Mail
Ø 14-02-06 : Trunk Receiving Type FSK / DTMF
Ø 14-02-10 : Analogue Trunk Data Setup - Caller ID
Ø 14-02-16 : Analogue Trunk Receive Type FSK/DTMF
Ø 15-03-09 : SLT Caller ID Sending – Name and number
Ø 15-03-10 : SLT Caller Name Sending
Ø 15-03-11 : SLT Transmit Type FSK / DTMF
Ø 20-06-01 : Class of Service for Extensions
Ø 20-08-15 : Class of Service (Outgoing Call Service) - Block Outgoing Caller ID
Ø 20-09-01 : Class of Service Options (Incoming Call Service) - Second Call for DID/DISA/
Ø 20-09-02 : Class of Service Options (Incoming Call Service) - Caller ID Display
Ø 20-13-06 : Class of Service Options (Supplementary Service) Automatic Off-Hook Signal
Ø 20-19-01 : System Options for Caller ID - Caller ID Display Formatting
Ø 20-19-02 : System Options for Caller ID - Caller ID Wait Timer
Ø 20-19-03 : System Options for Caller ID - Edit Caller ID
Ø 80-02-01 : DTMF Tone Setup - Duration
Ø 80-02-02 : DTMF Tone Setup - Pause
n Related Features
Ø Automatic Route Selection
Ø Station Message Detail Recording
Ø Voice Mail
n Operation
None
Features Manual
DIL/E&M
40