Connecting External Devices; Ports On The Device - Fujitsu FUTRO S9010 Operating Manual

Connecting external devices

Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always hold the plug of a cable when removing it. Never unplug a
cable by pulling the cable itself.
To ensure that your device works properly, use only the connection cable
supplied or use a high-quality connection cable.

Ports on the device

Externaldevices Ports Device
The ports are located on the front and rear side of the device. The ports available on
your device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphone port, black (front
of device)
Headphones
Audio output (Line Out), light
green
Lineout Audiooutput
Serial port, turquoise
Serialport
USB 2.0 - Universal Serial
Bus, type-A, black
DisplayPort
DP
DisplayPort
PS/2 keyboard port, purple
Keyboardport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu
Microphone port, black (front of device)
Microphoneport
Audio input (Line In), light blue
Linein Audioinput
RJ45-LAN port
LANport
USB 3.1 Gen1 - Universal Serial Bus,
type-A: blue, type-C: black
UniversalSerialBus
PS/2 mouse port, green
PS/2mouseport Mouseport
Getting started
19