Drive Letter Assignment In The Expert Mode; Notes On Advanced Uninterruptible Power Supply (Ups) - Fujitsu 1PRIMERGY RX600 S4 User Manual

Chapter 4 Operations after OS Installation

4.5.2 Drive Letter Assignment in the Expert Mode

In the Expert mode, assignment of a drive letter to a particular partition arbitrarily is not available. Drive
letters specified on Disk Manager in the Expert mode will be sequentially assigned from the first
partition with "C, D, E..." when installation is completed, and an unused drive letter will be assigned to
the CD/DVD drive. To change the drive letter, perform the following procedures after installation.
The drive letters for the system and boot drive are not changeable.
1
Click [Start] – [Administrative Tools] – [Computer Management].
2
Click [Disk Management].
3
Right-click the partition to change the letter, and click [Change Drive Letter and
Path].
The [Change Drive Letter and Path] window appears.
4
Click [Edit].
The [Change Drive Letter or Path] window appears.
5
Change the drive letter.
4.5.3 Notes on Advanced Uninterruptible Power Supply
(UPS)
Note the following cautions when using an advanced uninterruptible power supply (referred to as UPS
herein).
UPS shutdown time setting
Set a sufficient time interval of UPS power-off time (time from the shutdown command to the actual
power-off). If the interval is not adequate, the power will be cut off before system shutdown. It may
cause data collapse. For details, refer to the manuals of UPS and the UPS management software.
Power supply control by UPS
Change the BIOS settings to turn on the server automatically at power recovery or during scheduled
operation using the UPS management software (PowerChute Network Shutdown and PowerChute
Business Edition).
1
Start up BIOS Setup Utility.
"7.2.1 Starting and Exiting BIOS Setup Utility" (pg.157)
2
Click the [Power] menu, and set [Power Failure Recovery] to "Always On".
96