4.3 Installing the LAN Driver
This section explains the procedure for installing the driver.
In addition to the case where the OS is installed manually, the driver must be installed
when a LAN card is added.
4.3.1 Installing the LAN Driver (Windows Server 2003 x64)
Perform the following procedures on all LAN device names under [Network adapters] in [Device
Manager].
1
Click [Start] → [Administrative Tools] → [Computer Manager].
2
Click [Device Manager].
3
Double-click a LAN device name under [Network adapters].
Names of the LAN devices are displayed as follows.
Onboard LAN (1000BASE-T)
PG-1852
PG-1862
PG-1882L
PG-1892L
4
Insert the driver disk created from the ServerStart CD-ROM into the server.
5
Click [Update Driver] in the [Driver] tab window.
The "Welcome to the Hardware Update Wizard" window appears.
6
Check [No, not this time] and click [Next].
7
Select [Install the software automatically (Recommended)] and click [Next].
The driver will be installed.
8
Click [Finish].
9
Click [Close] to close the properties window.
table: LAN device name
LAN cards
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 MT Desktop Adapter
Intel(R) PRO/1000 MT Dual Port Network Connection
Intel(R) PRO/1000 MF Server Adapter
Intel(R) PRO/1000 MT Server Adapter
PRIMERGY RX100 S3 User's Guide
LAN device name
4
127