Perle IOLAN + Rack User And Administration Manual page 96

+ - User and Administration Guide
IOLAN
90
IOLAN+ makes an immediate connection to
Preferred
the indicated host machine and port number.
The Host , Remote and Mode fields must be
filled in. Although the user is connected to a
designated host, the user can hot key ^] back
from this connection to the unit. This allows
a user to configure the system so that they
always log into one machine, but still have
the option of connecting to others.
IOLAN+ makes an immediate connection to
Dedicated
the indicated host and port number. The
user is limited to only a single connection to
the indicated host, and can not hot key back
to the IOLAN+ menus. The Host , Remote
and Mode fields must be set properly.
This setting is similar to the Dedicated
Initiated
connection, but requires the user to enter the
return key before initiating a connection. It is
widely used for terminal/PC connections.
This field defines the remote host to be
Host
connected to. Either a host name or an IP
address may be used. If a name is entered it
must be in the host table. Default is blank.
This field defines the remote TCP port number
Remote Port
for IOLAN+ to connect to. Use port number 23
for telnet and 513 for rlogin . Default is 0 .
This field defines the local TCP port for IOLAN+
Local Port
to listen on. The port default to 10000 plus the
number of the port.