Perle IOLAN + Rack User And Administration Manual page 124

+ - User and Administration Guide
IOLAN
SU
TELNET
TEST
118
The show statistics command is used to display
any of the IOLAN+ statistics for troubleshooting
only (tcp, ip, udp, icmp, tty, eth, gateway ).
Example: show statistics tcp would show the
TCP parameters screen. You can add a delay
option which updates the screen every n seconds
such as: show stats tcp 3 (use ESC to quit).
Syntax:
su
Description: This function allows the user to become the
administrator. When this command is entered
the IOLAN+ prompts the user for the admin
password which is iolan by default (please
change for better security).
Syntax:
telnet [host] [port]
Description: This function allows the user to make a telnet
connection to the specified host and port number.
If the user does not specify the port IOLAN+
defaults to port 23 which is the defined Unix
telnet port. If the host name is not defined then
the unit prompts the user for the host and port.
Syntax:
test [port port_number] [count <n none>]
Description: This function causes IOLAN+ to run a simple
output test on the port. IOLAN+ outputs a
continuous stream of data in a preset pattern.
To stop the test press any key.