Perle IOLAN + Rack User And Administration Manual page 123

SHOW
set server
This function allows the administrator to alter
the IOLAN+ set-up including initial IP address
and name.
set slip [IP address]
This function causes the port to go into SLIP mode
provided secure is not set to LAN. You can
specify an IP address to used by the remote host.
set ppp [IP address]
This function causes the port to go into PPP
mode provided secure is not set to LAN. You can
specify an IP address to used by the remote host.
set password [admin] or [login]
This function allows you to change the admin or
login passwords of the IOLAN+.
Note: The remote access functions of IOLAN+ are not
configurable from CLI (i.e. the Access section of
the Administrative Menu).
Syntax:
show <parameter>
Description: This function allows the user to see most of the
IOLAN+ configuration parameters, but not
change them. The set command is used to
configure the ports. The show command works
with gateway, hosts, netstat, server, sessions,
slip, extra, users, version.
The show ports command requires the port
number. Example: show port 1 would show all
the port settings for port 1.
The show lines command requires which fields
you wish to view on all ports ( access, flow,
hardware, options, tcp, user ). Example: show
lines access would show the access settings of
the port menu.
Command Line Interface
117