Perle IOLAN + Rack User And Administration Manual page 95

This field defines how a user logs in. Default
Authentication
is none.
This sets authentication off.
None
This forces the incoming user to enter the
Local
IOLAN+ login authentication password
(same password for all ports).
This is full authentication requiring a user ID
Host
and password that will be checked against a
designated authentication host.
This provides two levels of security with
Both
Local authentication first, then Host .
This field defines whether the connection is raw
Mode
or telnet . A raw connection is a straight TCP
connection. Setting the mode to telnet causes it
to do the telnet negotiations with a network
connection. This should be set to raw for RCP
and LPD printing & modem connections, and
be set to telnet for reverse telnet connections.
This field defines whether the user has access
Connection
to multiple connections or only a single
connection, and the level of control the user
has over these connections.
IOLAN+ does not try to initiate any
None
connections. The user has full control and
access to all 4 sessions. This is the default.
The Menu Interface
89