Server Configuration Menu - Perle IOLAN + Rack User And Administration Manual

+ - User and Administration Guide
IOLAN
20
** Administrator **
Name [IOLAN
IP address [204.17.209.8
Subnet mask [
Ethernet address [00:80:d4:00:9e:a1]
Language [English ]
Identification [
Lock [Disabled]
Password limit [5
CR to initiate [Yes ]
SNAP encoding [Disabled]
Boot host [204.17.209.1
Boot file [
Init file [
MOTD file [
Domain name [
Name server [
WINS server [
________________________________________________________________________________
Figure 12: Server Configuration menu.
The important fields that you need to fill in are as follows:
Name: In the example above the communications
server name has been set to IOLAN. It is a good
idea for the IOLAN+ name entered here to
match the name entered in the host machine's
domain name server.
Note: For more information about domain name servers,
consult your operating system manuals.
IP Address: This address must be set to a value that is
consistent with the network the IOLAN+ is on.
Having filled in the fields press the
Commands pop-up menu as shown below.
Note: The Ethernet address is factory set. This address is
uniquely assigned to the IOLAN+ and MUST NOT be changed.
SERVER CONFIGURATION
] Debug mode
]
]
Ethernet interface [AUTO
]
] Boot diagnostics [Enabled ]
] NS Port
]
key. This brings the
REMOTE-ADMIN
[0 ]
]
]
]
]
]
]
[53 ]