Ioland Printing - Port Setup Menu Screen; Printing; Using Ioland - Perle IOLAN + Rack User And Administration Manual

7.1 Using ioland

Configuration
There are three methods of printing from your IOLAN+: ioland,
LPD, or RCP. ioland is the recommended method, however
this will depend on your application and operating system.
1. ioland provides a pseudo TTY interface to Unix print
spoolers (not available for Windows
and the binaries associated with it are available from
the Perle CD provided with the unit or from the
Perle web site.
2. LPD is the 'line printer daemon' protocol supported by
most operating systems including Windows
(i.e. SCO, AIX, DG/UX, HP-UX, Linux, Solaris, etc.)
Check our US FTP site (ftp.perle.com) for an LPD
spooler for Windows
3. RCP is 'remote copy printing' and available on Unix
systems. It requires a special interface script also found
on the Perle CD.
We suggest you use the Perle ioland utility on the CD
provided. The ioland utility can be used for Unix printing
only. Ioland is a Unix tty port redirector. For non-UNIX
applications use LPD, see Section 7.2.
** Administrator **
Hardware
Speed [9600 ]
Parity [None]
Bit [8]
Stop [1 ]
Break [Disabled] IP Addresses
Monitor DSR [No ]
Monitor DCD [No ]
User
Name [
Terminal type [ansi
TERM [
Video pages [0]
CLI/Menu [Menu]
Reset Term [No ]
Figure 26: Ioland printing - Port Setup Menu screen.

Printing 7

® 95/98.
PORT SETUP MENU
Flow ctrl
Flow ctrl [Hardware]
Input Flow [Enabled ]
Output Flow [Enabled ]
Src [ ]
Dst [ ]
Options
] Keepalive [No ]
] Rlogin/Telnet [Telnet]
] Debug options [No ]
Map CR to CR LF [No ]
Hex data [No ]
Secure [No ]
MOTD [No ]
Printing
®
). This software
® and Unix
REMOTE-ADMIN
Keys
Hot [^]] Intr [^C]
Quit [^@] Kill [^U]
Del [^@] Sess [^@]
Echo [^@]
Mask [ ]
Access
Access [Remote ]
Authentication [None ]
Mode [Telnet]
Connection [None ]
Host [ ]
Remote Port [0 ]
Local Port [10006]
55