Perle IOLAN + Rack User And Administration Manual page 121

SET
Description: This function allows the user to save the IOLAN+
configuration to a specified host machine and
file. The configuration is saved to the specified
Boot Host and put into the file name described in
the Init File parameter (see Set server ). IOLAN+
uses the TFTP protocol to save and load the file.
Because of a restriction in most TFTP
implementations the file must exist before it can
be written. Admin level is required.
Example: To create the file under Unix type:
1.
2.
Syntax:
set <parameter> [value], etc.
Description: The set command allows the administrator to
configure any of the IOLAN+ parameters. It also
allows the user to alter their own set-ups and
change terminal type. Admin level is required
on most functions.
set admin
This function allows the user to become the
administrator or admin level. The command su
can also be used.
set menu
This function sets the user's port into menu
mode, assuming that the term type has been set.
set modem
This function transmits a series of modem
initialisation commands to the attached modems.
A sequence of port numbers from 1 upward can
be given or all to indicate all serial ports.
Command Line Interface
touch filename
chmod 666 filename
115