Perle IOLAN + Rack User And Administration Manual page 47

Authentication Port: The TCP service to be used for
Login Prompt:
Password Prompt:
Success Indication
String:
Failure Indication
String:
Maximum
Login Attempts:
Login Timeout:
Disconnect Probe:
Modem Authentication & Logging
authenticating users. Normally this is set
to 23 for Telnet.
The string used by IOLAN+ to know
when to send the login ID. Set this field
to ogin:. Leave out the first letter as some
systems use a 'L' and others use a 'l' as
the first letter.
The string used by IOLAN+ to know
when to send the users password. Use
'ssword' as depicted above.
The string used by IOLAN+ to determine
if the login ID and Password were valid
and the login process was successful.
Normally you will see the string 'Last'
after successfully logging in.
The string IOLAN+ will look for to
determine that the Login ID or Password
were invalid. You will normally see the
word 'invalid' or 'incorrect' as part of the
failure message from the host.
The number of login attempts IOLAN+
will allow the user to make before
dropping the call.
This defines the amount of time in
seconds IOLAN+ will wait for the user to
provide a login ID and password before
dropping the line.
This option determines whether
authentication probe logins will be
terminated on completion of
authentication.
41