Using Rcp - Perle IOLAN + Rack User And Administration Manual

+ - User and Administration Guide
IOLAN
LPD printing
from AIX
LPD printing
from HP/UX
Tips

7.3 Using RCP

62
If the lpsystem command is not performed, the lpadmin
command will return an error indicating that the system
named in the -s parameter does not exist even though the
system is listed in the /etc/hosts file.
Note: Although it is possible to create a printer spool on the
IOLAN+, UNIX lpd queues only print one job at a time. The
host will wait for one job to complete before spooling the
second so all jobs will go to the same queue and print from
the same IOLAN+ port.
Use SMIT to configure remote printer.
Use SAM to configure remote printer.
Hunt groups: Hunt groups are supported on IOLAN+ for
printing. To use this, use the same queue name
in the IOLAN+ Port Setup name field.
RCP is used as an alternative option (where LPD and ioland
are not available). It is a Unix only command set. A script is
provided on the Perle CD for RCP.