Perle IOLAN + Rack User And Administration Manual page 122

+ - User and Administration Guide
IOLAN
116
The modem commands are taken from the Modem
Config field of the Remote site devices menu.
set term
This function allows a user to alter their terminal
type. If the term field is left blank the IOLAN+
displays a list of all the currently supported
terminals (ansi, dumb, vt100, wyse50, wyse60,
tvi925, ibm3151, vt320, falco, hp700).
set port
This function allows a user to set the parameters
for their port, or the administrator to set the
parameters for any port.
set port
This allows the user to set all of the port
parameters for their own port. The user
will be prompted for each parameter in
this section (e.g: speed, parity, etc.).
set port [number]
This allows the administrator to set all of
the port parameters for the indicated port.
The user will be prompted for each
parameter in this section.
set port [number] [access, flow,
hardware, options, tcp, user]
This allows the administrator to set all of
the port parameters for the indicated port
in the indicated section. E.g. set port 1
access would prompt through the access
section of the port screen 1. If no
number is given, it gives your current
port parameters.