Honda CRF450X 2005 Service Manual page 136

FUEL SYSTEM
Note the installation
Assemble the roller and throttle valve plate on the
directionofrhe
throttle valve.
throttle valve plate. •
Install the throttle valve plate with the seat side
facing towa rd the throttle valve.
Install the throttle valve assembly into the ca rbure -
tor with the valve plate facing towards the engine
t;';:~iil~~~~E
side .
6-22
• Make sure the throttle valve moves smoothly.
Align the holes in the throttle shaft arm and throttle
shaft .
'05, '06:
Apply locking agent to the screw threads.
Install and tighten the throttle shaft screw to the
specified torque.
TORQUE: 2.1 N 'm (0.2 kg'·m, 1.5 IbHt)
After
'06: Apply locking agent to the torx screw threads .
Install and tighten the throttle shaft torx screw to
the specified t orque.
TORQUE: 2.1
N'm
(0.2
kgf·m, 1.5Ibf·ft)
'05, '06:
Install the jet needle clip to the jet needle.
STANDARD CLIP POSITION:
2nd pOSition from the top
Afrer '06:
Install the jet needle to the needle holder and then
install the needle clip to the jet needle,
if it
was
removed.
'05, '06:
JET NEEDLE
After '06:
NEEDLE HOLDER
•
VALVE
NEEDLE CLIP
•
JET NEEDLE
/ IC$
•
•