Starter Clutch Assembly - Honda CRF450X 2005 Service Manual

CLUTCH/STARTER CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
11-22
Check the gear holder shafts sliding surface for
wear or damage.
Measu re the gear holder shafts 0 .0.
SERVICE LIMIT: 11.989 mm (0.4720 in )
Check the staner reduction gea r B and reduction
gear shaft for wea r or damage.
Measure the reduction gear B I.D.
SERVICE LIMIT: 10.085
mm
(0.3970 In )
Measure the reduction gear shaft 0.0.
SERVICE LIMIT: 9 .980 mm (0.3929 in)
ASSEMBLY
Apply transmission oil to the clutch outer slid ing
surface.
Install the one-way clutch into the staner clutch
outer with the blue paint facing out.
Install the snap ring securely.
ON E-WAY CLUTCH
SNAPA ING