Fork Damper Disassembly - Honda CRF450X 2005 Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Using quick successive motions, pull the slider out
of the outer tube.
Do nor
damage the
Carefully remove the slider bushing by prying the
slider bushing,
slot with a screwdriver until the bushing can be
especially the
pulled off by hand.
sliding surface. To
Remove the following:
preven t loss of
tenSIOn, do not -
Guide bushing
open the bushing -
Back-up ring
more than -
Oil seal
necessary. -
Stopper ring
14-18
- Dust seal
FORK DAMPER DISASSEMBLY
Set the fork damper in a vise with a piece of wood
or soft jaws to avoid damage.
Hold the fork damper assembly using the special
tool.
TOOL:
l ock nut wrench, 50 mm
07WMA·KZ30100
Remove the fork cap assembly from the fork
damper.
NOTE :
• Be careful not to damage the fork cap bushing.
• Do not disassemble the fork cap assembly.
• Replace the fork cap as an assembly if it is dam-
aged.
DUST SEAL
FORK CAP ASSEMBLY
FORK
DAI~P"R
SLIDER
BUSHING