Muffler Removal/Installation (After 07) - Honda CRF450X 2005 Service Manual

\
FRAME/BODY PANELS/EXHAUST SYSTEM
Align the muffler
Install the heat shield and washer, tighten the bolt
tabs
lind
hear
shield
to the specified torque.
grommets.
TORQUE: 12 N'm (1.2 kg f·m , 9 Ibf.ftl
Install a new gasket onto the exhaust pipe.
Install the muffler to the exhaust pipe.
Install the washer and muffler mounting bolts.
Tighten the muffler joint band bo lt to the specified
torque.
TORQUE: 21 N'm (2. 1 kgf·m , 15 Ibf.ft)
Tighten the muffler mounting bolts to the specified
torque.
TORQUE: 26 N'm /2.7 kgf·m, 19 Ibf-tt)
Install the right side cover (page 3-3 ).
MUFFLER REMOVAL/INSTALLATION
(After ' 07)
Remove the right side cover (page 3-3).
Loosen the muffler joint band bolt.
HEAT SHIELD
BOLTtvVASHER
3-11